PIONEER PREMIER TS-SW1041D 10

PIONEER PREMIER TS-SW1041D 10" SHALLOW SUBWOOFER


  • Spider-less Design – A traditional subwoofer uses a spider that is connected to the voice coil of the speaker, which keeps the coil aligned/centered while it moves in the magnetic gap. The spider is replaced with a dual cone and closed air suspension.
  • Symmetrical Dual Cone and Closed Air Suspension (patent pending) - Pioneer engineers developed a dual cone to replace a conventional spider. The bottom cone is inverted and connected to a second cone; they move together uniformly, keeping the voice-coil in place. The dual cone construction creates a “closed air suspension” which result in better linearity, increased reliability and dramatically reduce the depth of the speaker.
  • C-Type Shaped Reinforcement Nodes – The cone takes a special design with C-Type nodes that make it extremely strong and minimize cone flex for accurate bass response.
  • M-Shaped Three-Layer Fiber Woven Surround (patent pending) – Unlike traditional surrounds that use an arch shaped design, the patent pending technology “M” shape surround provides better sound linearity.
  • Interlaced Ultra-Long Glass Fiber Reinforced IMPP Cone – Ultra-long glass fibers combined with IMPP form a very stiff cone, which is great for bass reproduction while the dual cone reinforcement nodes connect the front and rear drive cones together greatly increase structural rigidity.
  • Cast Aluminum Basket with Fin-Shape Design (patent pending) – A one-piece basket with specially shaped fins move airflow in a circular pattern, which is especially helpful when the subwoofer’s basket sits too close to the front of an enclosure. The design eliminates any type of “loading effect” that causes unwanted pressure to the rear of the cone.
  • Angled Push Terminals (patent pending) – By angle mounting the push terminals, speaker wires are out of the way.

PIONEER PREMIER SHALLOW SUBWOOFERS

Specifications

12-inch

Depth

3.25”

Total Height

3.88”

Maximum Music Power

1400 Watts

Nominal Power Handling

350 Watts

Frequency Response

18Hz ~ 1kHz

Sensitivity (Efficiency)

88 dB

Impedance

4 Ohm

Voice Coil Diameter

2-9/16”

Magnet Weight

62 oz

Recommended Enclosure Size

0.5 ~ 1 cu. Ft.


Price: $179.99
Buy Product Online | Visit Store Home
 
Manufactured by Pioneer


 Other Items from Subwoofers

  KENWOOD KFC-W2510 10" SUBWOOFER 800 WATTS - The W2510 10" sub rolls out plenty of booming bass, thanks to its incredibly beefy woofer cone. It has a distinctive swirl-design ribs that reinforce the cone for extra strength, so the bass stays clean and clear when the tones go deep.
  PIONEER PREMIER TS-SW1041D 10" SHALLOW SUBWOOFER - 
  KENWOOD EXCELON KFC-XW1202DVC 12" DUAL VOICE COIL - The 12" Carbon-PP Hybrid Cone, Dual Coil Woofer has a 1-Piece Cast Aluminum Basket. Easy Connection Speaker Terminal, Dual Magnet Drive, AFC Damper High-Roll Butyl Rubber Surround.
  KICKER 06CVX124 12" COMP VX SUBWOOFERS - 10" subwoofer with dual 4-ohm voice coils, Kicker's Solobaric L7 subwoofers gives you pounding performance that will separate your system from the rest. The dual voice coil design allows you to wire your sub to get the most out of your system. The one-piece composite cone, called SoloKon, encompases a continuous-contact rear cone brace for super-tight bass. The radical BAM (Basket and Motor Assembly) features a cast aluminum basket with louvered design and perimeter venting for maximum power handling and heat dissipation.
  KICKER 07CVR104 - 
  KICKER 06S12L54 12" SOLO BARIC L5 WOOFER - 12" sub with dual 4-ohm voice coils, The new KICKER Solo-Baric L5 subwoofer is slammed with performance features attained from its big brother L7. The Solo-Baric L5 uses a square cone to give you the most possible cone area for a given size baffle - 16% to 20% more cone area. This means that an L5 will play louder than a round woofer of the same size since it increases air flow. It's like buying one size subwoofer and getting the output of the next bigger size!
  KICKER 06S8L74 8" SOLO-BARIC L7 SUBWOOFER - Kicker goes another step further with the fourth generation of the Solo-Baric L7. Not since its introduction at the turn of the century has this industry cornerstone had so many technological advances, which makes its patents covering the square subwoofer and related designs even more impressive. Once you experience the Solo-Baric's titanic bass for yourself, you'll never see subwoofers in the same way.
  KICKER 07C154 - 
  KICKER 06S12L74 12" SOLO-BARIC L7 SUBWOOFER - The 06S12L7 12" sub starts with a square cone made from aluminum-treated composites and suspended in a tough Santoprene rubber surround. This combination of an ultra-stiff cone and excellent cone excursion creates great air-flow, for bass you can not only hear but feel.
  KICKER 07CVR124 - 
  KICKER 06CVX104 10" COMP VX SUBWOOFER - The completely new CompVX series takes all the booming-bass technology from KICKER's award winning Solo-Baric L7 subs and applies it to a traditional round driver. The one-piece composite cone, called SoloKon, encompasses a continuous-contact rear cone brace for ultra-tight bass. The unique BAM (Basket and Motor Assembly) features a cast aluminum basket with louvered design and perimeter venting for max power handling and heat dissipation. Other features duplicated from the Solo-Baric L7 series include progressive roll poly-cotton spider, polycarbonate trim ring and terminal shroud, and chrome-plated back plate. All KICKER models have dual voice coils for ultimate wiring flexibility: 2-ohm DVC models let you run at 1 or 4 ohms, 4-ohm DVC models allow 2-ohm or 8-ohm operation.

 

  Return To Car Stereo/Audio at Drive In Autosound

 

 

e-commerce software
Ecommerce powered by MonsterCommerce shopping cart.